No gears Husky.

Well you know this huskies going to run forever so just weld it up!

Makes perfect sense [You must be registered and logged in to see this image.]

all the best ben buddy,you,ll fix it

all fixed you cocks, look at the pics. when you take the casing off it allows the gear selector spline to move about, i pulled the fecker which disengaged the fork selector from the fulcrum pivort roller bastard thing.

ha ha and you had brand new oil in her,did you change the neptune clip

Neptune all done wege, oil went straight back in. [You must be registered and logged in to see this image.]

Nice one Ben - Glad it was an easy fix

ok own up? who moved the rock and let it crawl out [You must be registered and logged in to see this image.]

Tilts wrote:Neptune all done wege, oil went straight back in. [You must be registered and logged in to see this image.]

Cant you just crank the bike over on its gearshift side saves removing the oil?

Just asking? [You must be registered and logged in to see this image.]

Rich, Rich, Rich, Rich, Rich Rich!

No. Need to get to gearshift to move the spline, ive done that before when i changed clutch in my 525, that worked fine.

move the ballast valve in five clicks and only put 10mm of oil back up your arse,knighter does it every week,he phoned me last night,use a plunger on your knob with a peanut rammed up your bellend,mad feeling