best way to glue front mudguard

I have a crack in my front mudguard and have tried to glue it with superglue, araldite and some special glue - none of them would stick. anyone know what glue works on the ktm plastics?

Electrical banding and zipties seems to have held my rad scoop together. plastic welded it too for good measure

plastic weld with a soldering iron !

plastic weld with a soldering iron !

Clarky_two wrote:I have a crack in my front mudguard and have tried to glue it with superglue, araldite and some special glue - none of them would stick.  anyone know what glue works on the ktm plastics?

Loads of flex in the front mudguard & heavy when full of mud, don't waist your time & buy a new one.

drill and lots of little orange cable tie's no one will ever know (does really work)

like owen says - but also smother the cable ties in superglue....

but as wolfy says it flexes all the time and will only last a while - there are loads of cheap aftermarket mudguards that will fit

buy a red mudguard might be cheaper

Just get a steel one from a Fordson Major, it'll never break then

f@ck it Lee , just buy a new bike