4 Pin fork cap tool

Does anyone have a 4pin fork cap tool at all? and more importantly would mind letting me use to to get my forks serviced this week, seals are gone and I am sad

I made one out of a spanner for an angle grinder once worked good

Good idea that, just widen and reweld it?

The one I had was a bit too wide so I just squeezed it a bit in a vice

Sound thanks for the infos chap!

I havnt got the proper tool but I have got a adjustable pin tool which does the job

Grind 4 chunks out of a 32mm socket leaving 4 lugs that fit into the fork holes.

Taffyboy07 wrote:Grind 4 chunks out of a 32mm socket leaving 4 lugs that fit into the fork holes.

its not the lug type mate, 4 pins on mine, good idea if i ever have that type tho!

Taffyboy07 wrote:Grind 4 chunks out of a 32mm socket leaving 4 lugs that fit into the fork holes.

Spot on mate!

[You must be registered and logged in to see this link.]

3.47 definatly worth a punt!

mizzed wrote:

Taffyboy07 wrote:Grind 4 chunks out of a 32mm socket leaving 4 lugs that fit into the fork holes.

Spot on mate!

[You must be registered and logged in to see this link.]

3.47 definatly worth a punt!

Adjustable pin tool worked a treat. It worked even better when I figured to loosen the top clamps first. Spent 30mins swearing at it before working that one out!

Thanks again both for the infos!