2011 ec300 jd jetting help

View previous topic View next topic Go down

2011 ec300 jd jetting help

Post by Quigs on Wed Apr 01, 2015 8:46 pm

Looking for some help with Jetting my 2011 Ec300. 38mm ASII Carb, Running 50:1, 97/98ron unleaded.

I had the Jetting setup for the winter and was spot on. (around 0-7 degrees, sea level-1000ft)

38PJ
Blue Needle #3
170MJ
a/s 1.5out

Temps are starting to rise here now and Seems to be running a bit rich, plug is quite black)

I have a few Questions.
Current temp is around 10 degrees now

which needle should i go with? or just leave as is?

Any recommendations that i should start with?

Thanks for the help, just want to get it right as doing the drovers enduro on weekend.

Cheers
avatar
Quigs

Posts : 41
Join date : 2014-09-30
Age : 32
Location : Vale of Glamorgan

Back to top Go down

Re: 2011 ec300 jd jetting help

Post by Skippy on Thu Apr 02, 2015 6:16 pm

Give Steve Plain a ring mate, he's good as gold
...he was the UK gasgas team manager...and was envolved in the original design of the ec...not many around that'll know more than him...01597 825 817... Gasgas dealer in Llandrindod Wells...
avatar
Skippy

Posts : 1311
Join date : 2010-10-04
Age : 49
Location : On a Hill

Back to top Go down

Re: 2011 ec300 jd jetting help

Post by Skippy on Thu Apr 02, 2015 6:18 pm

Give Steve Plain a ring mate, he's good as gold
...he was the UK gasgas team manager...and was envolved in the original design of the ec...not many around that'll know more than him...01597 825 817... Gasgas dealer in Llandrindod Wells...
Too many people will give you their opinion...there's no substitute for experience..
I'm running a 35 pilot...advised by Haines and co.... Another Gasgas dealer in Coleford...
avatar
Skippy

Posts : 1311
Join date : 2010-10-04
Age : 49
Location : On a Hill

Back to top Go down

Re: 2011 ec300 jd jetting help

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum