Help.....!

Page 1 of 3 1, 2, 3  Next

View previous topic View next topic Go down

Help.....!

Post by wolfy on Fri Mar 22, 2013 9:15 pm

I have drowned the bike again. Embarassed

Proper joby this time tho....................................................................



lol! lol! lol!


[You must be registered and logged in to see this image.]


No chance of a dedrown out there, so had it recovered home.

Drained the oil, after the g....ush of water affraid
Drained the petrol tank.
Plug out again & pumped the girl dry.
New oil & filter & the old girl sung a tune Very Happy
Repeated the oil change three times, now the oil is looking less like milk.

My problem is, she is puffing like a two stroke out the tail pipe ( which i think is just the packing is wet & will pass )
The other problem i can see is she is puffing like tomas the tank out the air box (breather pipe from the engine)

Have i got big problems or not....?
avatar
wolfy
Forum Sponser

Posts : 6631
Join date : 2010-11-30
Age : 48
Location : Care Home, but sometimes they let me out

Back to top Go down

Re: Help.....!

Post by dai 530 on Fri Mar 22, 2013 9:33 pm

I could be back pressure worn cylinder or fooked ring s i wouldld do a compression test and see what readings you got . Well i got to say you love you water wolfy
avatar
dai 530

Posts : 585
Join date : 2012-07-01

Back to top Go down

Re: Help.....!

Post by wolfy on Fri Mar 22, 2013 9:39 pm

Cheers dai, will look into that thanks Very Happy
avatar
wolfy
Forum Sponser

Posts : 6631
Join date : 2010-11-30
Age : 48
Location : Care Home, but sometimes they let me out

Back to top Go down

Re: Help.....!

Post by shocker on Fri Mar 22, 2013 9:56 pm

Fair play - if that had even been my bike, I don't think getting the camera out would have been the first thing I'd of thought of at that point lol!
avatar
shocker
Forum Sponser

Posts : 3101
Join date : 2010-07-21
Age : 58
Location : in exile just over the border

Back to top Go down

Re: Help.....!

Post by steve on Fri Mar 22, 2013 10:03 pm

Well lets face it at that point its already a bit wet Laughing
Did the engine cut out before it went under?
I would say if its puffing out of the breather you got back pressure, Is the breather from the top of the engine or the bottom end?
If its the bottom end breather you got pressure passing the rings.
If the breather at the top you got pressure passing the valve stem seals.
Thats how it works on a car anyway but a engines a engine init.
avatar
steve

Posts : 4170
Join date : 2010-01-26
Age : 41

Back to top Go down

Re: Help.....!

Post by wolfy on Fri Mar 22, 2013 10:16 pm

The engine cut out while riding she took on water & locked.
The breather is from the bottom end, please tell me she is just letting off steam
avatar
wolfy
Forum Sponser

Posts : 6631
Join date : 2010-11-30
Age : 48
Location : Care Home, but sometimes they let me out

Back to top Go down

Re: Help.....!

Post by Mogs on Fri Mar 22, 2013 10:26 pm

Bloody hell wolf ! Proper job!
avatar
Mogs

Posts : 876
Join date : 2011-02-24

Back to top Go down

Re: Help.....!

Post by karlos on Fri Mar 22, 2013 10:38 pm

Where is that Wolfy? Just so I know to avoid it!
Good luck with getting it sorted, hope it doesn't prove too costly.
avatar
karlos

Posts : 691
Join date : 2010-01-27

Back to top Go down

Re: Help.....!

Post by wolfy on Fri Mar 22, 2013 10:42 pm

That's monkswood crossing in flood karlos Embarassed .
Think the one after the golflinks would be dodgy at the mo too mind.
avatar
wolfy
Forum Sponser

Posts : 6631
Join date : 2010-11-30
Age : 48
Location : Care Home, but sometimes they let me out

Back to top Go down

Re: Help.....!

Post by Denzil on Fri Mar 22, 2013 10:55 pm

Fuck me Wolfy ! Was you out today is the bike ok!!!!!!
avatar
Denzil

Posts : 970
Join date : 2011-01-03
Age : 52
Location : In a field

Back to top Go down

Re: Help.....!

Post by Sponsored content


Sponsored content


Back to top Go down

Page 1 of 3 1, 2, 3  Next

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum