Mousses
4 posters
Page 1 of 1
Mousses
so i got a back mousse on a couple weeks back and today i got one on the front - I got them from AB's in Pant
I know most of you moussers put a valve in where the old valve used to be - but AB's didnt do that for me
should I plug the hole where the valve used to be? - what with ?
the back wheel has probably got water in by now - should i worry about that ?
I know most of you moussers put a valve in where the old valve used to be - but AB's didnt do that for me
should I plug the hole where the valve used to be? - what with ?
the back wheel has probably got water in by now - should i worry about that ?
crm250dude- Posts : 3481
Join date : 2013-11-03
Location : Right here, Right now!
Re: Mousses
How you going to plug it without taking it off again?
I wouldn't worry about the water to much you'll have it going in through the rim/bead anyway.
I wouldn't worry about the water to much you'll have it going in through the rim/bead anyway.
steve- Posts : 4255
Join date : 2010-01-26
Re: Mousses
I was thinking of using some Mike Tyson
crm250dude- Posts : 3481
Join date : 2013-11-03
Location : Right here, Right now!
Re: Mousses
Take them back and tell him to put a bolt in valve on there
mizzed- Posts : 3094
Join date : 2015-05-04
Age : 44
Location : Tafarnaubach
Re: Mousses
Dude just put silicone in the hole for now it wont be a problem, the main reason we cut an old valve out and stick it in there is mousses are illigal on the road and the feds are sneaky bastards, at least when the valve is in there they cant tell, when you change the tyre stick one in then but remember to pull the core out so you can put air in quickly to seat the bead
juljam33- Posts : 2874
Join date : 2011-10-28
Age : 91
Location : spanking my monkey
Re: Mousses
Exactly what I was thinking bit of Mike Tyson - silly coon
crm250dude- Posts : 3481
Join date : 2013-11-03
Location : Right here, Right now!
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|