South Wales Trail Riders

    No gears Husky.

    Share
    avatar
    Tilts

    Posts : 2693
    Join date : 2010-01-26
    Age : 43
    Location : Long way from home.

    No gears Husky.

    Post by Tilts on Fri Jun 25, 2010 12:04 pm

    had to get a new thread incerted into the drain level plug, so i had to remove the right hand side casing, anyway, checked valves, changed oil and filters. whilst the casing was off i noticed that the gear lever and spline had about an inch movement in and out. put casing back on, play gone, but she's stuck in second gear. clutch works fine, but cant change gear.

    what the fuck have i done now. [You must be registered and logged in to see this image.]
    avatar
    Portboy29

    Posts : 374
    Join date : 2010-05-29
    Age : 66
    Location : IOW

    Re: No gears Husky.

    Post by Portboy29 on Fri Jun 25, 2010 2:23 pm

    sounds like the gear selector shaft has dropped its selector fork whilst you were sliding the shaft too and fro, would have thought it would have a circlip or something to hold it all in place. could be a strip down job ma boy ?
    avatar
    captain caveman

    Posts : 4176
    Join date : 2010-01-26
    Location : Pot noodle land

    Re: No gears Husky.

    Post by captain caveman on Fri Jun 25, 2010 7:45 pm

    fucked it up thats what you done
    your the only fooker that could brake a scrambled egg [You must be registered and logged in to see this image.]

    wege

    Posts : 1597
    Join date : 2010-01-29

    Re: No gears Husky.

    Post by wege on Fri Jun 25, 2010 8:11 pm

    yo ben do u want me to have a look at it ,i think i could fix it,you know i,m an ace mechanic,sounds like an 13 amp fuse to me ....problem solved ...fucker lol 🐷
    avatar
    ktm jon

    Posts : 1311
    Join date : 2010-01-26
    Age : 50
    Location : Next to the donkey on the right

    Re: No gears Husky.

    Post by ktm jon on Fri Jun 25, 2010 8:21 pm

    take it back off tilts perhaps a gear is not meshing happens all the time and keep calm
    avatar
    Tilts

    Posts : 2693
    Join date : 2010-01-26
    Age : 43
    Location : Long way from home.

    Re: No gears Husky.

    Post by Tilts on Fri Jun 25, 2010 10:34 pm

    Thanks Jon!!

    Wege, you are a cock.
    avatar
    Tilts

    Posts : 2693
    Join date : 2010-01-26
    Age : 43
    Location : Long way from home.

    Re: No gears Husky.

    Post by Tilts on Fri Jun 25, 2010 10:35 pm

    steve wrote:fucked it up thats what you done
    your the only fooker that could brake a scrambled egg [You must be registered and logged in to see this image.]

    thanks for that steve, your always full of support...

    wege

    Posts : 1597
    Join date : 2010-01-29

    Re: No gears Husky.

    Post by wege on Sat Jun 26, 2010 12:15 am

    or try the sky hook their basrtards on them huskys fuckers 🐷
    avatar
    Tilts

    Posts : 2693
    Join date : 2010-01-26
    Age : 43
    Location : Long way from home.

    Re: No gears Husky.

    Post by Tilts on Sat Jun 26, 2010 1:07 pm

    Drained the feckin oil back out, removed right hand casing and investigated the problem, didnt take my over developed brain long to spot the problem.

    Metal finging had come off the other metal finging. If anyone can educate me on the correct terminology feel free. Apart from Wege who is probably pissed on 6 litres of plonk already.

    Took some pics for you geeks to beat one out over the internals of the greatist off road machine ever built. ummm ya bastards.

    [You must be registered and logged in to see this image.]

    [You must be registered and logged in to see this image.]
    avatar
    Portboy29

    Posts : 374
    Join date : 2010-05-29
    Age : 66
    Location : IOW

    Re: No gears Husky.

    Post by Portboy29 on Sat Jun 26, 2010 1:58 pm

    As advised selector fork/pawl had disengaged from its fulcrum pivot roller. Ah fuck it, shit design !!!!.

    Sponsored content

    Re: No gears Husky.

    Post by Sponsored content


      Current date/time is Mon Jul 16, 2018 1:10 pm