Ktm 300 starter wet mod

View previous topic View next topic Go down

Ktm 300 starter wet mod

Post by simon on Tue Jun 23, 2015 9:07 pm

Has anyone on here done the wet mod (add a breather, stick some oil in) to their 2 stroke ktm starter. The main question is does it work or should I stick to using grease on the gears.
I looked on forums where some say its great, then others say its done nothing to help prolong the life of the bits inside scratch
avatar
simon

Posts : 290
Join date : 2013-08-25
Location : South Wales

Back to top Go down

Re: Ktm 300 starter wet mod

Post by juljam33 on Wed Jun 24, 2015 9:29 am

Prolonged my 11 didn't touch it until 175 hrs and then it was only change bushes but my 14 fucked the bendix after 70hrs I'd Defford put the breather pipe in and seal the drain hole even if you don't put oil in.....I only drop the bendix in oil before fitting anyway rather than add oil
avatar
juljam33
Forum Sponser

Posts : 2670
Join date : 2011-10-28
Age : 84
Location : spanking my monkey

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum