South Wales Trail Riders
Would you like to react to this message? Create an account in a few clicks or log in to continue.

2011 ec300 jd jetting help

2 posters

Go down

2011 ec300 jd jetting help Empty 2011 ec300 jd jetting help

Post by Quigs Wed Apr 01, 2015 8:46 pm

Looking for some help with Jetting my 2011 Ec300. 38mm ASII Carb, Running 50:1, 97/98ron unleaded.

I had the Jetting setup for the winter and was spot on. (around 0-7 degrees, sea level-1000ft)

38PJ
Blue Needle #3
170MJ
a/s 1.5out

Temps are starting to rise here now and Seems to be running a bit rich, plug is quite black)

I have a few Questions.
Current temp is around 10 degrees now

which needle should i go with? or just leave as is?

Any recommendations that i should start with?

Thanks for the help, just want to get it right as doing the drovers enduro on weekend.

Cheers
Quigs
Quigs

Posts : 41
Join date : 2014-09-30
Age : 39
Location : Vale of Glamorgan

Back to top Go down

2011 ec300 jd jetting help Empty Re: 2011 ec300 jd jetting help

Post by Skippy Thu Apr 02, 2015 6:16 pm

Give Steve Plain a ring mate, he's good as gold
...he was the UK gasgas team manager...and was envolved in the original design of the ec...not many around that'll know more than him...01597 825 817... Gasgas dealer in Llandrindod Wells...
Skippy
Skippy

Posts : 1311
Join date : 2010-10-04
Age : 55
Location : On a Hill

Back to top Go down

2011 ec300 jd jetting help Empty Re: 2011 ec300 jd jetting help

Post by Skippy Thu Apr 02, 2015 6:18 pm

Give Steve Plain a ring mate, he's good as gold
...he was the UK gasgas team manager...and was envolved in the original design of the ec...not many around that'll know more than him...01597 825 817... Gasgas dealer in Llandrindod Wells...
Too many people will give you their opinion...there's no substitute for experience..
I'm running a 35 pilot...advised by Haines and co.... Another Gasgas dealer in Coleford...
Skippy
Skippy

Posts : 1311
Join date : 2010-10-04
Age : 55
Location : On a Hill

Back to top Go down

2011 ec300 jd jetting help Empty Re: 2011 ec300 jd jetting help

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum