South Wales Trail Riders

    welder needed ebbw vale

    Share
    avatar
    jams

    Posts : 446
    Join date : 2014-02-16

    Re: welder needed ebbw vale

    Post by jams on Tue Jul 29, 2014 11:17 am

    Yeah, bit the bullet £211  affraid for a flimsy piece of metal! No more 12 o'clocks for me!

    Might drop the old one off to you Dave if you wouldn't mind having a go, might be handy to have a spare even if it's not perfect. There is a pic in general chat under 'wish I had these yesterday' thread. Cheers

    tri-z

    Posts : 285
    Join date : 2014-02-28

    Re: welder needed ebbw vale

    Post by tri-z on Tue Jul 29, 2014 11:42 am

    Just had a look now, chuck it in the car and I'll grab it from you next time we go out mate I'm sure I'll be able to sort it.

    avatar
    jams

    Posts : 446
    Join date : 2014-02-16

    Re: welder needed ebbw vale

    Post by jams on Tue Jul 29, 2014 12:02 pm

    Cool cheers Dave.
    avatar
    nate

    Posts : 991
    Join date : 2010-11-17
    Location : gwent

    Re: welder needed ebbw vale

    Post by nate on Tue Jul 29, 2014 5:43 pm

    Place in cwmbran who specialise in alloy welding tel: 01633860043

    hope this helps

    nate

    avatar
    phil990

    Posts : 2260
    Join date : 2010-02-15
    Location : Bridgendish. Welsh Riviera...

    Re: welder needed ebbw vale

    Post by phil990 on Tue Jul 29, 2014 8:02 pm

    I can get it done in Bridgend if you are down this way. Iain Clark does it all. It will probably need sleaving.

    Put it back on bike bend it back to correct position using plank of wood inside swinging arm and against side of sub frame.

    Rest a length of wood across the top of the sub frame and line it up from the back of the bike with say the handlebars to make sure it is in correct position.

    Do this all first as it may save you a second visit to the welder.  Very Happy 


    Sponsored content

    Re: welder needed ebbw vale

    Post by Sponsored content


      Current date/time is Tue Jul 17, 2018 4:29 am