South Wales Trail Riders
Would you like to react to this message? Create an account in a few clicks or log in to continue.

horn

3 posters

Page 1 of 2 1, 2  Next

Go down

horn Empty horn

Post by bonkeye Tue Nov 27, 2012 5:37 pm

not a problem as such but what horn will i need for my GasGas? any 12v horn or are they diffrent for AC / DC systems? i got a battery one at the more & hardly works so going to put a tidy one on when i make the new loom for my bike
its a 2000 GasGas 300 2 stoke
bonkeye
bonkeye

Posts : 653
Join date : 2012-01-01
Age : 44
Location : Pyle, Bridgend

Back to top Go down

horn Empty Re: horn

Post by Skippy Tue Nov 27, 2012 5:39 pm

Just buy a normal cheap one off ebay with pos and neg. terminals and connect up to a live...you should have the wiring there already anyway...
Skippy
Skippy

Posts : 1311
Join date : 2010-10-04
Age : 55
Location : On a Hill

Back to top Go down

horn Empty Re: horn

Post by bonkeye Tue Nov 27, 2012 5:45 pm

there's tons of cut wires in my loom from botch jobs over the years (not from me) ive just made do with it till now so going to make a new loom, or i could order one from spain for 41 euro's

[You must be registered and logged in to see this link.]

loads of other Gasser stuff on the skip...... cheap for plastics & graphics kits
bonkeye
bonkeye

Posts : 653
Join date : 2012-01-01
Age : 44
Location : Pyle, Bridgend

Back to top Go down

horn Empty Re: horn

Post by bonkeye Tue Nov 27, 2012 5:46 pm

this one ok to use?

[You must be registered and logged in to see this link.]
bonkeye
bonkeye

Posts : 653
Join date : 2012-01-01
Age : 44
Location : Pyle, Bridgend

Back to top Go down

horn Empty Re: horn

Post by Skippy Tue Nov 27, 2012 5:50 pm

you got the original handlebar switch? I got 2 spares, both got f'd. buttons either lights or indicators but would probably do the job...the horn button is on them im sure...got to do mine too, bt think i got less wires as mines a cross country ???
[You must be registered and logged in to see this link.]

This should be all you need...
Skippy
Skippy

Posts : 1311
Join date : 2010-10-04
Age : 55
Location : On a Hill

Back to top Go down

horn Empty Re: horn

Post by Skippy Tue Nov 27, 2012 5:51 pm

bonkeye wrote:this one ok to use?

[You must be registered and logged in to see this link.]

Spot on fella....gimme a shout if your stuck...
Skippy
Skippy

Posts : 1311
Join date : 2010-10-04
Age : 55
Location : On a Hill

Back to top Go down

horn Empty Re: horn

Post by Skippy Tue Nov 27, 2012 5:55 pm

From memory (and im getting on a bit now !!!) yellow anb black wires are the horn if you gottem....
Skippy
Skippy

Posts : 1311
Join date : 2010-10-04
Age : 55
Location : On a Hill

Back to top Go down

horn Empty Re: horn

Post by bonkeye Tue Nov 27, 2012 6:28 pm

ok cheers skip
bonkeye
bonkeye

Posts : 653
Join date : 2012-01-01
Age : 44
Location : Pyle, Bridgend

Back to top Go down

horn Empty Re: horn

Post by bonkeye Tue Nov 27, 2012 6:30 pm

you prob will have less wires, i did have handle bar switches but a branch wacked it & broke it in to so im after a compact one now or maybe a KTM CEV they seem to be well made & smaller than the gasser one
bonkeye
bonkeye

Posts : 653
Join date : 2012-01-01
Age : 44
Location : Pyle, Bridgend

Back to top Go down

horn Empty Re: horn

Post by Skippy Tue Nov 27, 2012 6:41 pm

Yeah your rite there fella, like the new ones gasgas has fitted.....they're on that sire u put the link on.....but too bloody expensive !!!
Skippy
Skippy

Posts : 1311
Join date : 2010-10-04
Age : 55
Location : On a Hill

Back to top Go down

horn Empty Re: horn

Post by Sponsored content


Sponsored content


Back to top Go down

Page 1 of 2 1, 2  Next

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum