crank case

View previous topic View next topic Go down

crank case

Post by wolfy on Thu Aug 02, 2012 7:29 pm

Anyone know for a left hand crank case for a 2001 ktm 125......? or can they be welded....?

Thanks
avatar
wolfy
Forum Sponser

Posts : 6416
Join date : 2010-11-30
Age : 48
Location : Care Home, but sometimes they let me out

Back to top Go down

Re: crank case

Post by captain caveman on Thu Aug 02, 2012 8:01 pm

Is it cracked or holed?
avatar
captain caveman

Posts : 4176
Join date : 2010-01-26
Location : Pot noodle land

Back to top Go down

Re: crank case

Post by phil990 on Thu Aug 02, 2012 8:39 pm

Chain to tight? Tried to pull the sprocket bearing out of the casing?

I know somebody down Bridgend way who can do that work. Let me know if that helps...
avatar
phil990

Posts : 2201
Join date : 2010-02-15
Location : Bridgendish. Welsh Riviera...

Back to top Go down

Re: crank case

Post by graham on Thu Aug 02, 2012 8:56 pm

Hi paul i think you'll have to buy a pair as they're machined together in the factory
avatar
graham

Posts : 237
Join date : 2010-05-13

Back to top Go down

Re: crank case

Post by wolfy on Thu Aug 02, 2012 9:09 pm

Not sure cracked or holed hav'nt seen it yet, its on denzils boys bike.

It was'nt the tension or a broken chain, i think it was a small stone between the chain & clutch protector (so they call them when you buy em Rolling Eyes ) that has done the damage.
Will let you know if it looks fixable. Cheers phil.

avatar
wolfy
Forum Sponser

Posts : 6416
Join date : 2010-11-30
Age : 48
Location : Care Home, but sometimes they let me out

Back to top Go down

Re: crank case

Post by wolfy on Thu Aug 02, 2012 9:12 pm

graham wrote:Hi paul i think you'll have to buy a pair as they're machined together in the factory

Thanks gray never heard that before, i will let him know.

Cheers
avatar
wolfy
Forum Sponser

Posts : 6416
Join date : 2010-11-30
Age : 48
Location : Care Home, but sometimes they let me out

Back to top Go down

Re: crank case

Post by captain caveman on Thu Aug 02, 2012 9:19 pm

Can you fix it with some of that chemical metal stuff? Tried it on the wr cured the leek but was still leaking through the seal.

There's no real pressure in a 2 stroke it go,s rock solid and can be sanded or filed down once dry.

If you weld it your going to have to strip the casing to do a proper job if its near the sprocket.

There's a chap in brynmawr that does alloy welding 07817498123 He,s in the estate where the council offices are.
avatar
captain caveman

Posts : 4176
Join date : 2010-01-26
Location : Pot noodle land

Back to top Go down

Re: crank case

Post by wolfy on Thu Aug 02, 2012 9:37 pm

Cheers steve, will way up the options tomorrow.
avatar
wolfy
Forum Sponser

Posts : 6416
Join date : 2010-11-30
Age : 48
Location : Care Home, but sometimes they let me out

Back to top Go down

Re: crank case

Post by lanerboy on Thu Aug 02, 2012 10:28 pm

used chemical metal on my mates 300 exc fixed a hole the size of a 5p and it never ever leaked which really impressed me, we fixed it on the lane aswell i was well impressed with that stuff

try it you got nowt to loose before you weld it you will just need to clean it off and its only about 6 quid a tube

lanerboy

Posts : 247
Join date : 2011-02-24
Age : 48
Location : midlands where they make the beer

Back to top Go down

Re: crank case

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum