berings/bushes?

Hi lads, I have a bit of play in my swinging arm on my exc 2005. Its at the bottom end of the sping where it connected to the swinging arm. Just need to know what they called to find them. Any infomation helpful cause theres a few orange ones on here!

i think you mean your lower shocker bush from what you describe if i remember correctly they come in two halves and press in from either side

I found on ebay SWINGARM PIVOT BEARING KIT from all balls does anybody know if these ar the correct ones?

noddy is the play at the bottom of your shocker where it fits onto the swingarm or is the play in the swingarm at the front where the main bolt goes through the frame and the front of the swingarm as they are two different kits

bottom of the shock mate

its the lower shocker bush you need then not swing arm bearings i think this is what you need

see wolfy's link below mine was wrong

This is what you need noddy....
[You must be registered and logged in to see this link.]

yes thats the one wolfy good find ignore my link i remember it coming in two halves

as long as your spacers and seals aint shagged get these...

changed mine on the EXCF, ney problemo. seals are about 2quid each if they're toast

[You must be registered and logged in to see this link.]

lchris21 wrote:as long as your spacers and seals aint shagged get these...

changed mine on the EXCF, ney problemo. seals are about 2quid each if they're toast

[You must be registered and logged in to see this link.]

Good one...... Thanks for that Good saving there.....