New Forum Sections
3 posters
Page 1 of 1
New Forum Sections
Took this idea from tilts today in his post in general chat and thought it should be included [You must be registered and logged in to see this image.]
Re: New Forum Sections
My last humdinger that done my swede in was the rear wheel on the XR600r. Had some play in rear wheel, bought new bearings only to find that it was the hub worn inside and not the bearings. So the hunt was on for a hub..Couldnt source a second one anywhere, but was given a XR650r hub by Walnutwhip..
So this is where the fun begins, 650 and 600 use different spindles, so Lyns made me a new spacer to fit the spindle, so youve got to get different spacers to suit, and also drill bigger holes for sprocket bolts, no big deal, then youve also got to drill and re tap new holes for disc bolts..
So, a 650 hub will fit a 600, with the above alterations!!
So this is where the fun begins, 650 and 600 use different spindles, so Lyns made me a new spacer to fit the spindle, so youve got to get different spacers to suit, and also drill bigger holes for sprocket bolts, no big deal, then youve also got to drill and re tap new holes for disc bolts..
So, a 650 hub will fit a 600, with the above alterations!!
Tilts- Posts : 2693
Join date : 2010-01-26
Age : 48
Location : Long way from home.
Re: New Forum Sections
i;ll give you help but you must commit lol
ktm jon- Posts : 1311
Join date : 2010-01-26
Age : 55
Location : Next to the donkey on the right
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum